工程行业Schneider Electric OPC Factory Server 3.50 Win英文安装版软件

热心网友 0 2年前

自动草稿

Schneider Electric OPC Factory Server 3.50

施耐德电气OPC工厂服务器3.50

File Size|文件大小：789MB

——————————-

【安装类型：安装版====系统类型：Win====语言类型：英文】

OPC Factory Server是一款功能强大的产品，是业界软件系统与plc等控制硬件之间通信的首选解决方案。OPC源于OLE(过程控制)一词，它是用于在工业控制系统(如Scada)之间交换数据和各种参数的标准和通用协议。该标准基于与微软的OLE / DCOM技术相同的技术，旨在提高效率，并在数据源和数据消费者之间建立一个标准和一致的通信桥梁。该协议的优点是它不依赖于硬件。因此，它可以为各种行业的硬件和软件环境做好准备。

基于此协议，OPC工厂服务器，或OFS，允许Windows应用程序立即访问PLC数据并将其用于预期目的。该程序所做的是简化和澄清软件和硬件之间的通信过程。

访问关键和重要的信息，开放的界面，清晰的架构和各种软件系统的可用性只是使用OPC工厂服务器的一些好处。本程序可应用于Scada软件系统、MES、ERP到Excel等宽屏软件中，设计并实现高效的自动化系统。该产品的开放接口还允许程序员使用c++语言直接连接到OPC服务器并提取他们想要的数据。使用该产品，程序员可以在最短的时间内设计和实现他们想要的控制系统，或者至少是该领域的技术知识，而不必参与这些系统的底层细节。

你的电脑必须符合下列硬件要求，才能运行OFS软件:

微软& XP 2000

频率- 850兆赫

Ram – 256 MB

微软Vista & 200x服务器

频率- 3ghz

内存- 1gb

阅读Crack文件夹中的Readme.txt文件。

注:输入部件号和序列号(不要复制粘贴)

下载Schneider_Electric_OPC_Factory_Server_3.50

769 MB

OPC Factory Server is a powerful product and a preferred solution for communicating between software systems and control hardware such as PLCs in the industry. OPC is derived from the term OLE for Process Control, which is a standard and universal protocol for exchanging data and various parameters among industrial control systems such as Scada. This standard is based on the same technology as Microsoft’s OLE / DCOM technology and aims to increase the efficiency and establish a standard and coherent communication bridge between data sources and data consumers. The advantage of this protocol is that it does not depend on hardware. Therefore, it can be prepared for hardware and software environments in various industries.
Based on this protocol, OPC Factory Server, or OFS, allows Windows applications to access PLC data instantly and use it for the intended purposes. What this program does is simplify and clarify the process of communication between software and hardware.
Access to key and important information, open interface, clear architecture and usability in various software systems are just some of the benefits of using OPC Factory Server. This program can be used in Scada software systems, MES, ERP to wide screen software such as Excel and design and implement efficient automation systems. The product’s open interface also allows programmers to connect directly to the OPC server using the C ++ language and extract the data they want. Using this product allows programmers to design and implement their desired control system in the shortest possible time, or at least technical knowledge in this field, and not to get involved in the low-level details of these systems.
Your PC needs to meet the following hardware requirements to run the OFS software:
Microsoft & XP 2000
Frequency – 850 MHz
RAM – 256 MB
Microsoft Vista & 200x server
Frequency – 3 GHz
RAM – 1 GB
Read the Readme.txt file in the Crack folder.
Note: Type Part Number and Serial (do not copy and paste)
Download Schneider_Electric_OPC_Factory_Server_3.50
769 MB

——————————-

Schneider Electric OPC Factory Server 3.50

——————————-