工程行业JCT Consultancy LinSig v3.2.33.0 Win英文安装版软件

热心网友 0 2年前

自动草稿

JCT Consultancy LinSig v3.2.33.0

File Size|文件大小：61MB

——————————-

【安装类型：安装版====系统类型：Win====语言类型：英文】

LinSig是由JCT咨询公司开发的一款专业软件，它可以让交通工程师模拟交通信号及其对交通容量和车辆排队的影响。对交通信号的影响进行建模，可以优化信号配时，以减少延误或增加最佳交叉路口的通行能力。该程序由Brian Simonite在20世纪80年代开发，并由制造商更新了几次。该程序通过使用交通并优化十字路口的定时信号以达到其最大容量来实现这一点。

硬件需求

绝对最低标准硬件是:

至少有2Ghz处理器或同等处理器的个人电脑。

1 gb RAM。

25Mb的可用硬盘空间。

最低图形分辨率为1280 × 1024，全彩色(32位)。

19”监控。

光盘驱动器(仅安装时需要)。

两个按钮的鼠标。

建议的硬件标准为:

配备3.0 GHz处理器的个人电脑。更大网络的优化得益于更快的处理器

2 gb RAM。大型网络的优化将受益于3-4Gb的RAM

图形分辨率为1920 × 1200，全彩色(32位)。

24″1920 × 1200分辨率显示器。

额外的显示器(带有兼容的显卡)非常有用，但不是必需的。对于较大的网络，第二台监视器对于实现最大生产率至关重要。根据我们的经验，第二台显示器(成本约为180英镑)是提高LinSig生产率的最经济有效的方法之一。(以及许多其他应用程序!!)

一个三键滚轮鼠标。不是必需的，但对于缩放图形视图非常有用。

请注意，根据您使用的Windows版本，Windows的硬件要求可能会超过上述要求。

软件需求

LinSig 3可以在以下任何平台上使用:

微软Windows 10

微软Windows 8

Microsoft Windows 7(32位和64位)

微软Windows Vista

微软视窗XP

Microsoft . net 2.0或3.5版本也需要出现。

虽然LinSig 3不再正式支持较早版本的Windows，但可以设想，LinSig应该能够成功地运行在:

Microsoft Windows 2000及internetexplorer5.5或以上版本。

LinSig 3不能在Windows 98或以下运行。

阅读Crack文件夹中的Readme.txt文件。

下载JCT_Consultancy_LinSig_v3.2.33.0

58 MB

LinSig is a specialized software developed by JCT Consultancy that allows traffic engineers to model traffic signals and their impact on traffic capacity and vehicle queuing. Modeling the effects of traffic signals will optimize the signal timing to reduce the delay or increase the capacity of the optimal intersections and junctions. The program was developed by Brian Simonite in the 1980s and has been updated several times by the manufacturer. The program does this by using traffic and optimizes the timing signal of intersections to its maximum capacity.
Hardware requirements
The absolute minimum standard hardware is:
PC with at least a 2Ghz processor or equivalent.
1Gb RAM.
25Mb of free hard disk space.
Minimum Graphics resolution of 1280 × 1024 with Full (32 bit) color.
19 ”Monitor.
CD Drive (required for installation only).
A two-button mouse.
The suggested hardware standard is:
PC with a 3.0 GHz processor. Optimization of larger networks benefits from a faster processor
2Gb RAM. Optimization of larger networks will benefit from 3-4Gb of RAM
25Mb of free hard disk space.
Graphics resolution of 1920 × 1200 with full (32 bit) color.
24 ″ 1920 × 1200 resolution monitor.
An additional monitor (with compatible graphics card (s)) is very useful but not essential. For larger networks a second monitor becomes essential for maximum productivity. In our experience a second monitor (cost ~ £ 180) is one of the most cost effective ways to improve LinSig productivity. (And many other applications as well !!)
CD Drive (required for installation only).
A three-button wheel mouse. Not essential but extremely useful for zooming graphical views.
Please note that depending on the version of Windows you are using, the hardware requirements for Windows may exceed the above.
Software requirements
LinSig 3 can be used on any of the following platforms:
Microsoft Windows 10
Microsoft Windows 8
Microsoft Windows 7 (32-bit and 64-bit)
Microsoft Windows Vista
Microsoft Windows XP
Microsoft .Net Version 2.0 or 3.5 is also required to be present.
Although LinSig 3 is no longer formally supported on earlier versions of Windows, it is envisaged that LinSig should run successfully on:
Microsoft Windows 2000 with Internet Explorer Version 5.5 or above.
LinSig 3 will not run on Windows 98 or below.
Read the Readme.txt file in the Crack folder.
Download JCT_Consultancy_LinSig_v3.2.33.0
58 MB

——————————-

JCT Consultancy LinSig v3.2.33.0

——————————-